Making a Kitchen Countertop CNC Epoxy Salvage Slab | ToolsToday Short Video

Making a large kitchen island top with epoxy pour on this reclaimed salvage slab using my STEPCRAFT CNC machine and the Amana Tool® CNC Router Bits. https://www.toolstoday.com/?utm_sourc...

Watch the long version here    • Making a Kitchen Countertop CNC Epoxy Salv...  

This honey locust slab top came out looking absolutely amazing! What do you think? Do you like how this kitchen island reclaimed slab with epoxy pour CNC video turned out?

Feed, Speed & CNC Running Parameters

Amana Tool RC-2255 CNC Spoilboard Insert Carbide 3 Wing, Surfacing, Planing, Flycutting & Slab Leveler 2-1/2 Diameter x 1/2 SHK Router Bit
https://www.toolstoday.com/v-13329-rc...
RPM: 18,000
Feed Rate: 275ipm
Plunge Rate: 80ipm
Depth per pass: .0625”

Amana Tool 46206-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/2 Dia x 1-1/4 CH x 1/2 SHK 3 Inch Long Down-Cut Router Bit
https://www.toolstoday.com/v-13917-46...
RPM: 18,000
Feed Rate: 200ipm
Plunge Rate: 100ipm
Depth of cut: 0.140"
Chip Load Per Tooth: 0.006”

Amana Tool 46125-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia x 13/16 CH x 1/4 SHK 2-1/2 Inch Long Up-Cut Router Bit
https://www.toolstoday.com/v-13940-46...
RPM: 18,000
Feed Rate: 145ipm
Plunge Rate: 70ipm
Chip Load Per Tooth: 0.004”
Depth per pass: 0.125"

AGE Series MD160-480 For Festool Track Saw Machine Carbide Tipped Crosscut Saw Blade 160mm D x 48T ATB, 5 Deg, 20mm Bore Saw Blade
https://www.toolstoday.com/v-11041-md...

The mess was all cleaned up using a Fein Turbo 1 vacuum, available on our website, and worked great for sucking the slab to the wasteboard as well! I then cleaned up the sides using a Fein angle grinder, available on our website, with a @kutzall disc to clean it up. I sealed the edges with clear 2:1 and poured the @totalboat Fathom ThickSet epoxy into the mold. The piece was then flattened again.

Links
** Subscribe -    / toolstoday  

STEPCRAFT CNC MACHINE
https://www.toolstoday.com/stepcraft-...

FEIN 92035236090 Turbo I Wet/Dry Dust Extractor/Vacuum
https://www.toolstoday.com/v-16458-92...

** Shop the website - https://www.toolstoday.com/?utm_sourc...

** Like at Facebook - http://tinyurl.com/toolstoday-facebook

** Follow on Instagram -   / toolstoday  

More Links
Amana Tool® http://www.amanatool.com