How to Replace Sway Bar Link 98-02 Mercury Grand Marquis

Buy Now!
New Sway Bar Link Set from 1AAuto.com https://1aau.to/ib-1ASFK00266

1A Auto shows you how to repair, install, fix, change or replace broken, worn, or rattling front stabilizer sway bar links. This video is applicable to the 98, 99, 00, 01, and 02 Ford Crown Victoria and Mercury Grand Marquis models.

This repair was done on a 2000 Mercury Grand Marquis and the process should be similar on the following vehicles:
1998 Mercury Grand Marquis
1999 Mercury Grand Marquis
2000 Mercury Grand Marquis
2001 Mercury Grand Marquis
2002 Mercury Grand Marquis

🔧 List of tools used:
• 15mm Wrench
• 16mm Wrench
• 17mm Wrench
• 18mm Wrench
• 15mm Socket
• 16mm Socket
• 17mm Socket
• 18mm Socket
• 21mm Socket
• Lug Wrench
• 1/2 Inch Breaker Bar
• Ratchet
• Torque Wrench https://1aau.to/oabs-1AXAA00044
• Rust Penetrant
• 5mm Hex Wrench
• Chisel
• Floor Jack
• Hammer
• Jack Stands

Subscribe:    / @1aauto  

Check out our playlist:
Ford Auto Repair Videos:    • Ford Auto Repair Videos  
Mercury Grand Marquis 1992-2011:    • Mercury Grand Marquis 1992-2011  
Ford Crown Victoria 1992-2010:    • Ford Crown Victoria 1992-2010  

For More Info visit us at https://1aau.to/h-bok

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.