Volkswagen Atlas Front Control Arm Replacement DIY (2018-2021 VW Atlas VR6, Cross Sport)

►Modern suspensions typically use a few control arms per corner to keep each wheel in check. Their bushings allow for movement and absorption of harsh vibrations, but they keep the wheel where it should be at all times. When those bushings and joints wear down, it's time to start thinking about replacing your VW Atlas' control arms.

Control arm bushings are pressed into the metal arms, making them a challenge to replace on their own. A complete control arm replacement is not much more expensive and a much simpler job. Worn bushings will create play in the steering and ride, leading to sloppy handling and clunking or knocking at certain speeds over bumps. If bad enough, a worn bushing can throw your wheel alignment out of whack and cause rapid tire wear, so don't leave your worn arm in for too long.

In this video, Mike Hidalgo, FCP Euro's Professional DIYer, replaces the front control arms on a Volkswagen Atlas.

Shop the parts used in this video:
https://www.fcpeuro.com/products/vw-c...

https://www.fcpeuro.com/products/vw-a...

This video applies to the following vehicles:
Atlas (CA1)
2018 Volkswagen Atlas
2019 Volkswagen Atlas
2020 Volkswagen Atlas
2021 Volkswagen Atlas

Atlas Cross Sport (CA1)
2020 Volkswagen Atlas Cross Sport
2021 Volkswagen Atlas Cross Sport

00:00 - Intro
01:48 - Tools Needed
02:55 - Underbelly Pan Removal
03:47 - Wheel Removal
04:21 - End Link Replacement
08:34 - Volkswagen Atlas Front Control Arm Replacement
19:24 - Underbelly Pan & Wheel Install
20:14 - Wrap-up

SUBSCRIBE: https://www.youtube.com/fcpeuro?sub_c...

Get free parts from FCP Euro:
https://www.fcpeuro.com/page/lifetime...

Follow FCP Euro on:
  / fcpeuro  
  / fcpeuro  
  / fcpeuro  
https://www.fcpeuro.com/