(DIY) Silver overlay pendant with Art Clay Overlay Silver Paste

Art Clay Overlay Silver Paste is specifically formulated to bond to non-porous or glazed surfaces such as porcelain. It turns into 99% silver form after firing.
This movie is showing how to make a beautiful pendant with Art Clay Overlay Silver Paste.

☆Firing Instruction☆
The way of firing Overlay Silver Paste applied porcelain piece with combination of Art Clay Silver Type.
(1) Place the piece in a cold or warm kiln (below 200℃/390°F). Ramp the kiln to the applicable temperature. Take at least 15 minutes to reach firing temperature.
(2)Fire the piece at the temperature with the holding time set below.
Firing temp(Holding time): 650℃/1202°F (30mins),　700℃/1292°F(15mins) 750℃/1382°F(10mins) 780℃/1436°F(5mins) 800℃/1472°F(No needed).
*Take at least 15 minutes to reach firing temperature.
(3)Take out the piece after the kiln's temperature drops down below 100℃/212F.
*Quickly cooling the piece, such as quenching may cause it to break or crack.

If you do not have Art Clay with you, it is recommended to start with Starter kits or basic tools, firing mesh for gas stove, plus Art Clay products which are available from Art Clay official distributors in the world. Find your closest distributors from this link for local purchase and shipping.
https://www.artclay.co.jp/htm/family/