Python 200mph Challenge PART 3... Hyper-SS body🤩

#rccar #rcspeedrun #teamcorally #protoform
The next few steps towards achieving CRAZY speeds like we want is to add some fancy carbon fibre parts like splitters and battery trays and a GT body, a GT body should technically experience less drag compared to a open-wheel design but I'm no professional so I could be completely wrong, LET'S FIND OUT🤣

Python 200mph build:    • Python 200mph build  

Hobbywing Max6 160a 8s esc
https://hobbiesdirect.com.au/products...

Rocket "4274" 1950kv motor (40mm motor with thick cooling)
https://www.aliexpress.com/item/10050...

9imod 35kv MG servo
https://www.ebay.com.au/itm/185639610...

Turnigy BoltX 4500mah 6s 80c LiHV
https://hobbyking.com/en_us/turnigy-b...

Turnigy BoltX 5400mah 3s 80c LiHV
https://hobbyking.com/en_us/turnigy-b...

Full BoltX LiHV catalogue
https://hobbyking.com/en_us/batteries...

SpeedTek centre spool kit w/o spur gear
https://www.speedtekrc.com/product-pa...

Some of my other RCs you may want to check out here👇

Kraton 6s EXB:    • Kraton 6s EXB  

Arrma 1/8 Krayon 4s:    • Arrma 1/8 Krayon 4s  

Mojave 4s BLX:    • Mojave 4s BLX  

HPI Vorza S 6s:    • HPI Vorza S 6s  

RC Boats:    • RC Boats  

WLToys speedruns!:    • WLToys speedruns!  

RC Planes n jets:    • RC Planes n jets  

Quad Motor VRX
   • The Evolution of RC cars? QUAD motor RC ca...  

All of my DIY carbon, aluminium or polycarbonate parts are cut with a jigsaw and drilled with a hand drill.

Most of my materials like Carbon Fibre, Aluminium, polycarbonate and hardware like screws, bolts and nuts are purchased from Ebay Australia but most of what I use is easily found just by Google searching the material or hardware you require.

Email
[email protected]

Facebook
  / rc-crazy-110316407770980