xTool S1 and RA2 Rotary Guide - 40oz Tumblers, Full Wrap, Upgrades, and More!

In this video I will take you in depth into getting started with the XTOOL S1 and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.

Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of enclosed areas like the xTool S1. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the xTool S1.

xTool S1 Rotary Tilt Kit:
► https://embracemaking.com/products/xt...

Back Stop and Bubble Level Holder:
► https://embracemaking.com/products/xt...

RA2 Centerline Indicator:
► https://embracemaking.com/products/xt...

Since the S1 will require safety glasses when not using the bottom pan, I have made safety glasses available that protect your eyes from both blue and infrared laser light. You can find those glasses here:

► https://embracemaking.com/products/la...

Haven't purchased your XTOOL S1 yet? Links below for the best XTool prices!

XTOOL S1:
► https://www.xtool.com/products/xtool-...

XTOOL S1 deluxe bundle:
► https://www.xtool.com/products/xtool-...

XTOOL S1 Riser Base
► https://www.xtool.com/products/xtool-...

RA2 Module:
► https://www.xtool.com/products/xtool-...

In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the various xTool machines as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:

F1 V-Block, Pencil, Bottle Opener Jig
► https://embracemaking.com/products/xt...

If you need fume extraction solutions for the XTOOL F1, see below:

Fume Filtration and Extraction
► https://embracemaking.com/collections...

Here you can find the S1 to 4" Hose Adapter:
► https://embracemaking.com/products/xt...

S1 to 4" 90 Degree Low Profile Adapter:
► https://embracemaking.com/products/xt...

xTool AP2 / IF2 to 4" Hose Adapter:
► https://embracemaking.com/products/xt...

xTool Smoke and Fume Filtration System:
► https://www.xtool.com/products/xtool-...

xTool Inline Fan 2:
► https://www.xtool.com/products/xtool-...

If you are looking for products or items I've used with the S1 in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):

4" Inline Duct Fan with Controller
► https://amzn.to/4a91Nd4

Air Quality Monitor
► https://amzn.to/3xgoaA2

Electric Screwdriver:
► https://amzn.to/3P43fpz

Digital Calipers:
► https://amzn.to/48IQh7w

40oz Tumblers (4 pack):
► https://amzn.to/3Mr0EV0

Tall Stainless Tumbler 4-Pack
► https://amzn.to/3CWBXLh

12oz Mug With Handle (8 Pack)
► https://amzn.to/3wqDadE

12oz Tumbler With Straw (12 Pack)
► https://amzn.to/3HZswgC

20oz Tumbler With Straw (25 Pack)
► https://amzn.to/48hQONK

Full Wrap Graphics from Etsy (I have no affiliation with these sellers)

https://www.etsy.com/ca/listing/16859...

https://www.etsy.com/ca/listing/16914...

https://www.etsy.com/ca/listing/17656...

Thank you @xToollaser

0:00 Intro
1:10 Riser Base Install
5:48 S1 Tilt Mechanism Upgrade
15:12 Wine Tumbler Setup
16:12 Wine Tumbler Settings
19:10 Cylindrical Full Wrap
24:30 Smoke and Fume Filtration
27:55 40oz Full Wrap
36:51 No Rotary No Problem
42:01 Outro

#tumblertutorial #engraving #xtool

*******************************************************

If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:

► https://www.paypal.com/donate/?hosted...

A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!

Follow me on Instagram!

►   / embracemaking