How to Replace 4WD Hub Actuator 2007-2017 Ford Expedition

Buy Now!
New Auto-Locking Hub Actuator from 1AAuto.com https://trq.video/id-1AFWA00025

If the 4 wheel drive system is not functioning properly, you might need to replace one of the hub actuators. This video shows you how to install a new hub actuator in your 2007-2017 Ford Expedition.

• Check here for more videos on the 2007-17 Ford Expedition:    • Ford Expedition 3rd Generation 2007-17  

This repair was done on a 2010 Ford Expedition XLT 5.4L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2007 Ford Expedition
2008 Ford Expedition
2009 Ford Expedition
2010 Ford Expedition
2011 Ford Expedition
2012 Ford Expedition
2013 Ford Expedition
2014 Ford Expedition
2015 Ford Expedition
2016 Ford Expedition
2017 Ford Expedition

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oaQi-1AXAA00013
• Pry Bar https://trq.video/oDK-1AXAA00020
• 8mm Wrench https://trq.video/ofw-1AXAA00011
• 21mm Socket
• Trim Tool Set https://trq.video/oMT-1AXXX00006
• Channel-Lock Pliers https://trq.video/ohm-1AXAA00139
• Straight Cutters
• Ratchet https://trq.video/oa2r-1AXAA00016
• Socket Driver
• Socket Extensions https://trq.video/oaNB-1AXAA00015
• Torque Wrench https://trq.video/oabY-1AXAA00044
• Bearing Grease
• Paper Towels https://trq.video/otZ-1AXSS00035
• Rust Penetrant
• Center Punch https://trq.video/oiZ-1AXAA00055
• Floor Jack https://trq.video/oJ6-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oHq-1AXAA00065
• Razor Blade / Gasket Scraper
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford Expedition 3rd Generation 2007-17:    • Ford Expedition 3rd Generation 2007-17  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.