Ducati Hyperstrada / Hypermotard 821 - Oil and Filter Change & Mesh Screen Clean
Автор: JaxRacing
Загружено: 2023-11-05
Просмотров: 2798
As part of my diving into the first Desmo Service (30k km / 18k / mi) on my Hyperstrada I decided to get the engine oil and filter change out of the way. There's a few topics specific to this bike and Ducati in general that I also thought I would address. I also wanted to point out the tools needed and some thoughts on the process itself towards the start of the video. Thanks for watching!
Main larger oil drain plug - 12mm hex
Small magnetic drain plug - 5mm hex (I do not remove)
Oil filter socket/wrench size - 17mm
Screen plug cap on side - 14mm hex
Internal mesh screen filter - 17mm hex
Tighten oil drain plug(s) to a torque of 20 Nm (Min. 18 Nm - Max. 22 Nm)
Tighten new oil filter to a torque of 11 Nm (Min. 10 Nm - Max 12 Nm)
Refit mesh filter and tighten it to 42 Nm (Min. 38 Nm - Max. 46 Nm)
Tighten screen plug to a torque of 42 Nm (Min. 38 Nm - Max. 46 Nm)
HiFloFiltro HF153RC Oil Filter - https://www.amazon.com/dp/B00JDPXMWQ/
How to reset the Oil Service (and Desmo Service) Light Indicator here - • Ducati Hyperstrada / Hypermotard 821 - Des...
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
