Tokyo Marui M4 URGI NGRS AEG | 1234 | Testing

Richard from our tech team talks about and demonstrates a customer's upgraded Tokyo Marui M4 URGI NGRS AEG AEG build.
Please find the full build description below.

If you like our videos, please like, subscribe, and comment.

FPS Results (Hop Set / Range Tested 65m)
FPS (Measured On 0.20 gr BB)
FPS (Measured On 0.25 gr BB)
276 FPS (Measured On 0.30 gr BB)
Tested At Range - 65m 0.30 ammo

Scope Of Work:
Full custom build to max available.

Installed
Eagle6 M95 Spring
Prometheus 6.03 NEo tightbore barrel 363mm
Psionic r hop kit no7
Psionic Small Nub
Prometheus Hard Gears 18:1 Ratio
FPS bushings 5.9mm
FPS cylinder head
FPS cylinder
FPS piston head
FPS piston carbon fiber modded
FPS air nozzle
FPS spring guide
Eagle6 recoil spring
laylax trigger frame pin
Laylax Hard Castle Nut Ring
gate titan mosfet rear wired
Solink helical pinion gear
Solink Adjustable v5 motor - long
Prometheus bar kit for stock - deans


Tested On 1300mah 7.4v Lipo

Service Interval we would recommend at 50K rounds, it is optional.

Please remember if you use 11.1v it's at your own risk on any build not tested here on 11.1v.

All Parts we installed are covered under warranty; we do not cover original TM parts on upgraded replicas. Please see our warranty information on the website.

This RIF was put through our "4-point testing" before dispatch.

Thank you for the opportunity to do this build for you. We always appreciate long-term feedback on our builds, good or bad.

If you are a trade shop looking to stock the parts we make, we offer shop discounts for those parts. We would love to see more shops selling our parts.

www.eagle6.co.uk is the link to our website

FPS testing
All replicas are tested at range on the ammo customers would use in the game. The hop unit is set at a decent range, not over- or under-hopping. We then read on 0.20 ammo and the ammo you use. We can measure other ammos on request. The customer has to agree to these FPS numbers before dispatch. It's also the most accurate and correct way to test. Testing as the customer will use it. Though we consider FPS testing on 0.20 to be an inaccurate way of measuring, we will provide figures measured on them for easier understanding from the customer perspective, though in 99% of all cases, customers never actually game on 0.2 ammo anymore. If in doubt about FPS figures, please contact the site you game at for more information as each site can have different rules.