Robooter E60 Pro-A : how to unbox

1. E60 Pro-A Unboxing
2. Place the received package in an flat area
3. Use scissors to cut the green seal
4. Grasp both sides of the outer shell of the packaging box，open the lid of the packaging box
5. Take out the instruction manual and charger cable in the foam package
6. There is also a charger
7. Charging cable, charger cable, tool set, user manual
8. Please verify the above accessories
9. Take out the foam protective cover
10. Remove the outer packaging
11. Moving out E60 Pro-A
12. Remove the plastic film
13. Please note that the armrest cannot be heavily pressed
14. Unfold the foot pedal，press the black metal crossbar
15. Press and push forward to deploy the electric wheelchair
16. Tear off the protective sticker for the armrest light
17. Tear off the protective sticker from the monitor
18. Remove the protective film from the battery
19. Loosen the screws on the left and right handrails
20. Adjust the left and right armrests to the appropriate position and tighten the screws
21. Left armrest Right armrest
22. Open the armrest, get on the chair from the side, put both feet on the pedals, adjust the armrest
23. Adjust the length of the seat belt
24. Buckle the seat belt
25. Press and hold the power button to turn on the device, the back battery light will light up. Then press the power button to unlock it
26. Set the gear and gently push the joystick before starting.

Contact us freely
Email: info@robooter.com
Web: www.robooter.com