Mk6 Jetta SE 2011 rear drum to disc brake conversion Mk6 GTI calipers and wheel bearing replacement

Special thanks and shout outs to ‘Streamline Industries’ for completing/correcting the job for me.
On the passenger side, I had [unknowingly] installed the new caliper upside down and wasn’t able to figure out why the brake hose wasn’t able to reach it [I had the bleeder valve on the caliper facing downwards instead of upwards so the hose wasn’t reaching the connection point]

0:00 - parts needed for conversion
0:21 - remove lug caps/lug nuts/wheel
1:07 - remove drum screw/drum
1:41 - remove wheel bearing cap
1:45 - remove drum springs/hardware
2:50 - remove wheel bearing bolt/wheel bearing
3:01 - remove 'drum' dust shield/dust shield bolts
3:31 - install new 'disc' dust shield/dust shield bolts
4:00 - install new wheel bearing/wheel bearing bolt/wheel bearing cap
4:36 - install 'disc' brake rotor/rotor screw
4:52 - install 'disc' brake caliper carrier/caliper bolts/brake pads
5:08 - install 'disc' brake caliper
5:40 - install new brake hose
6:00 - remove old drum hose/lines
6:34 - view of converted passenger side
6:47 - shout outs to 'Streamline Industries'

other notes about this video:
In the first clips that shows all the parts needed, I had a set of ‘used’ ebay brakes, but I ended up installing ‘new’ ones instead so I still have the used calipers if anyone wants them, but one of the holes for the caliper bolt might be cross threaded
the 1st part of this video [drum removal] was filmed on the passenger side [right side]
the 2nd part of this video [GTI rear disc brakes] was filmed on the drivers side [left side]