Statim G4 2000 2-Year PM Kit Part 2: Replacing the Check Valve

This is part 2 in a series of videos we cut down to showcase the process of using your Statim G4 2000 PM Kit in steps. These steps will show you about the individual parts of your 2-year preventative maintenance parts that need to be maintained and/or replaced. In this part, we'll go over the replacement of the Check Valve. The Check Valve is one of the parts in need of replacement and/or maintenance after 2 years.

You can find this 2-Year PM Kit for the Statim G4 2000 on our site using the link below:
https://statimusa.com/product/scican-...

If you have any questions, feel free to cal us at 704-966-1650, or you can check out our different programs using the links below.

And if you have any questions about this issue or anything else, you can call us at 704-966-1650, option 3 for free tech support, or check us out using the links below:

Our Free Tech Support Program
https://statimusa.com/free-autoclave-...

Our Free Virtual Technician Support
https://statimusa.com/stanley-sterili...

Our Free Preventative Maintenance Program
https://statimusa.com/connect-with-us...

Timestamps:

00:00 Intro
00:19 Remove the Zip Tie and Valve Tubing
00:25 Remove the Old Check Valve
00:39 Install the New Check Valve
01:11 Connect the Tubing and Zip Tie It
01:22 Outro

Free Use Music by OlexandrMusic
https://www.olexandrignatov.com/freem...
  / olexandrmusic  
   / olexandrmusic  
https://www.olexandrignatov.com

#sterilization #autoclave #scican