Power Supply Circuit Build - Part 2 (The Ultimate DIY 3220-Point Breadboard)

⬇️⬇️⬇️ INFO FOR PROJECT IN DESCRIPTION ⬇️⬇️⬇️

This is the second video in a two part series of videos that shows you how to make the power supply circuit for The Ultimate DIY 3220-Point Breadboard. In this video we'll continue where we left off in part 1, where we were placing components on our PCB prototype board. We'll set the rest of everything else in place as we have planned in our prototype breadboard circuit build and on our scaled PCB board print off sheet, and finish everything up! You can obtain everything you need to follow along on this build at the given links below.

PARTS LIST:
https://motbots.com/the-ultimate-diy-...

TOOLS USED:
https://motbots.com/the-ultimate-diy-...

You can find all the "How-To" information to build this project for yourself and all the FREE downloadable info for this project at our website:
https://motbots.com/the-ultimate-diy-...

To see the entire build process from our videos, go to our playlist titled "The Ultimate DIY 3220-Point Breadboard":
   • How to Make The Ultimate DIY 3220-Point Br...  

Video for Our Website Page: "The Ultimate DIY 3220-Point Breadboard"
Page URL: https://motbots.com/the-ultimate-diy-...
Description: This is a supplemental video for a post made on our website.
Website: https://motbots.com

👕 GET A FINISHER'S T-SHIRT: The Ultimate DIY 3220-Point T-Shirt
https://www.bonfire.com/breadboard-tee/

Chapters:
0:00 - 0:31 - Intro/Previously On...
0:32 - 1:52 - Connecting Switches and DC Charge Adapter Socket to PCB (timelapse)
1:53 - 3:08 - Overview of Wiring
3:09 - 4:18 - Discussion of What's Next
4:19 - 5:21 - Connecting the LEDs and Charge Adapter Socket Ground (timelapse)
5:22 - 7:33 - Overview of What's Been Done and What's Next
7:34 - 9:53 - Overview of Glued Bendy Straws and Project Box, and Indicator LEDs
9:54 - 11:50 - Overview of 9V Battery Power Supply
11:51 - 15:41 - Making the 9V Battery Power Supply Circuit (and Mistake #1)
15:42 - 18:38 - Gluing 9V Battery Power Supply Project Box to Art Box Carrying Case
18:39 - 19:38 - Gluing 9V Battery Box to Inside of Project Box
19:39 - 20:03 - Installing 9V Battery
20:04 - 21:00 - Closing Up Project Box and Tidying Up Wires
21:01 - 21:29 - Forgot to Attach Switch #3 Positive Wire to 9V Power Supply (Mistake #2)
21:30 - 21:59 - Attaching Positive Wire from Switch #3 to 9V Power Supply Circuit
22:00 - 22:46 - "Technical Difficulties" #1
22:47 - 23:32 - Technical Difficulty #1 Fix
23:33 - 28:03 - Adding a Dupont Connector to Output Wire of Benchtop Power Supply
28:04 - 29:21 - Power Supply Test 1 (Technical Difficulties #2)
29:22 - 31:53 - Technical Difficulty #2 Fix
31:54 - 33:09 - Forgot to Attach Output Wires from Regulators to Binding Posts (Mistake #3)
33:10 - 38:02 - Attaching Output Wires from Voltage Regulators to Binding Posts
38:03 - 39:27 - Power Supply Test 2 (Technical Difficulties #3)
39:28 - 40:00 - Technical Difficulties #4
40:01 - 41:47 - Technical Difficulties #3 and #4 Fixes (9V Battery Power Supply Mistake Fix)
41:48 - 47:39 - Power Supply Test 3 (Success!)
47:40 - 48:25 - Final Discussion for Next Video for this Project

#motbots #motivatedrobotics #learnelectronics #electronicsproject #ultimate #breadboard #project #powersupply #circuit #howto #diy #timelapse