Tru-BoostX Gauge Set-Up and DYNO RUN

The Tru-BoostX Boost Controller Gauge (PN 30-0352) delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost!

The Tru-BoostX Boost Controller gauge delivers digital accuracy but with the simplicity of a manual boost controller. All programming is done using the faceplate buttons and no laptop is required. AEM’s specially designed Boost Control Solenoid and all necessary hardware is included.
More info here: https://www.aemelectronics.com/produc...

Tru-BoostX Gauge Features:
A boost display gauge and boost controller in one!
Easy to program – no laptop required
Boost control solenoid and all necessary hardware included
On-board 80PSIg MAP sensor—no upgrade kit needed for high boost vehicles
Two boost level settings and scramble boost setting
Wastegate open pressure setting for controlling boost spikes and faster spool
Display boost levels in PSI, BAR or KPA
Overboost protection and programmable alarms, ground output for optional LED warning light
Peak boost level recall
X-Series design for the best visibility (87% larger center LED and 33% larger face design)
X-Series dimensions make it easier to install (0.825” overall depth, 0.20” cup depth)
AEMnet CAN bus enabled for data logging (13 channels of data over 2-wire connection)
Standard 52mm (2-1/16”) cup
24 programmable green outer LEDs
Auto-dimming sensor for ideal brightness day or night
Positive locking connectors
Optional silver bezel with white faceplate accessory kit (30-0352-ACC)

Timestamps:
0:00- Intro
0:25- Tru-BoostX Showcase
6:31- Dyno Tests

Follow AEM Performance Electronics on Social Media:
Facebook:   / aemelectronics  
Instagram: https://www.instagram.com/aemelectron...
Twitter:   / aemelectronics  

Want more info?
Website: http://aemelectronics.com/