3d printed RC car Chevrolet K5 Blazer hardtop by [AN3DRC], Link to STL in the description

3d printed model of 1987 Chevrolet K5 Blazer hardtop!
STL Available for download on my website https://an3drc.com/e-shop/chevy-truck...
or on my Cults3D Chevy trucks page https://cults3d.com/en/users/AN3DRC_C...

You need 2.5 - 2.7 kg filament to print all the details for this model. Printing time 340-360 hours. The archive contains a folder with individual parts, and also a folder with parts combined into small groups, which can simplify the preparation of parts for printing for you. It usually takes 8 to 12 hours to print one group. All groups are numbered in the order recommended for printing. You can start assembling the model while printing the parts! The minimum required print area is 200x200x200mm.

Assembly instructions, a list of parts to buy and a list of fasteners can be found here https://docs.google.com/presentation/...

You can find a list of print parts and some recommendations for print settings here https://docs.google.com/spreadsheets/....

It is highly recommended to read the instructions before starting the project !!!

Model characteristics:
Scale 1 / 8.5
Length ~546mm
Width ~ 240/278mm(without/with mirrors)
Height ~ 240mm
Wheelbase ~ 318mm
Track ~ 198mm
Ground clearance ~ 65mm
4x4

Pay attention! If you are printing parts from a folder with individual parts, then it does not contain some parts for the right side. Therefore, if you cannot find some part for the right side, then just make a mirror copy, the part for the left side, in your slicer!