How to install a car turntable? Car turntable installation from Nostec

The video shows how to install a Car turntable.
1. Notice before installation:
1.1 Usually the pit diameter is 30-40mm bigger than turntable diameter.
1.2. The pit floor should be kept +/- 1 cm within the specified pit depth,
pit is as possible as flat.
1.3. Place the Center bearing at the middle center of the pit.
2. Then put the 8pcs steel strip around the center bearing.
3. Put the 8pcs rail track outside the steel strip, waiting for connection
Notice: The 8pcs rail track are marked with number 1-8,
it is clockwise from 1-8
4. Connect the center bearing and steel strip by M14-40 screws.
5. Connect the rail track with steel strip by screws
6. Place the steel works on the upside of rail track, total 8pcs; Motors are installed on the steel works already, total 4 motors
7. The steel works are also marked with 1-8, clockwise.
8. Connect the steel works by screw M12-100
9. Now we can wire the motors at the center bearing, One motor has 3 lines(Red, yellow and blue)
10. The connect the power to control box and wire to the center bearing
11. Then try the turntable, press the remote control, Check if all motors and wheels are working well
12. Then pave the top plate, Fixed it by small screws M6-20.
13. Test the turntable, Press Up button, anticlockwise rotation.
Please contact sales@nosteclift.com for more information.
Product link:
https://nosteclift.com/car-turntable/