DIY your own Skulls this Halloween with Rapid Set!

It's 'spooky' season! And we are so excited to share this fun DIY with you! We want to introduce you to Pacific Mold Design who has made this DIY possible. Be sure to check them out so you too can get your very own molds. We hope you enjoy this DIY and have a great Halloween!

Rapid Set Products:
Concrete Leveler: https://www.ctscement.com/product/con...
Mortar Mix: https://www.ctscement.com/product/mor...
Flow Control: https://www.ctscement.com/product/flo...

Concrete Mold Supplies:
Skull molds:    / @pacificmolddesign  
PAM cooking spray

Mixing Supplies:
Small hand drill
Gloves, mask & protective eyewear
Mixing bucket or bowl
Concrete sealer (optional)
Clean cool water
Rit Dye (optional) https://www.ritdye.com/products/black/

Small skull & plant holder skull:
Spray inside mold evenly with PAM (don't use too much)
Prepare 2 QT Concrete Leveler in bowl
Grab 12 oz of cold water
Mix in half the water, mix, then add the rest of the water as you mix
Mix until it is a pancake batter consistency
Add Rit Dye (optional) for color and mix evenly
Pour into molds
Tap sides lightly
No need to water cure since Concrete Leveler is self-curing
Demold after 2-3 hours
Take out of the mold in 4 hours
If desired, use a concrete sealer

Large Skull:
Spray inside mold evenly with PAM (don't use too much)
Prepare 2.3 QT Mortar Mix in bowl
Mix 1 TBS of FLOW Control to Mortar Mix
Grab 14 oz of cold water
Mix in half the water, mix, then add the rest of the water as you mix
Mix until it is a pancake batter consistency
Add Rit Dye (optional) for color and mix evenly
Pour into the mold
Tap sides to release air bubbles
Start water curing with cold water once the material has lost it's moist sheen on top
Keep water curing so that the material doesn't get too hot or else this could lead to cracking
Demold after 1 hour
If desired, use a concrete sealer

Decorate & enjoy!

www.ctscement.com
Contact us for more information at info@ctscement.com
OR 800-929-3030.