Vacuum Cleaner Handle Remote Control with SMART Button - AEG Electrolux

Issue: The vacuum cleaner remote does not work, does not respond or does not start the vacuum cleaner. First, make sure the battery indicator on the remote is lit when one of the buttons is pressed. If not, the battery may need to be replaced. See how to replace the battery from the handle this is shown in the user manual.
This video shows you what to do if remote control does not control vacuum cleaner. How To Pair the Handle of the Vacuum Cleaner with the Electronics of the Vacuum Cleaner. Bonus: One Handle can Rule them all.
In case of dead battery CR1632, you can replace it by disassembling Remote Control from Handle.

Reset of PCB/Printed Circuit Board - If the receiver has saved transmitter address (old remote control): Unplug the Vacuum Cleaner - for at least 5seconds
1. Plug in the cord to the mail
2. Send Reset signal (1+3+4 Button combination at the same time) - to do this you have 20seconds after connection to main
3. Unplug the cord from the main
4. Wait minimum 5seconds
5. Plug in the cord to the main again
6. Send Teaching signal (1+3 Button combination at the same time) - to do this you have 20seconds after connection to main
7. If the Teaching was successful the vacuum cleaner will turn on (for 1.5second) and after that turns off
8. The vacuum cleaner is ready to use

Handle with Remote Control Buttons: On-Off / Smart / +power / -power
AEG | Electrolux models:
AB81A2DG EB81A3UG EB81A3UGCH EB81H3SW EB81U1DB EB81U1LDB EB81U1WB EB81U2DBCH PD82-8DB PD82-8DBT PD82-9BM PD82-ALRG PD82-ALRGT PD82-ANIMA PD91-8SSM PD91-ALRG2 PD91-ANIMA PD91-ANIMT PD91-HALRG PD91ANIMAT VX82-1-5DB VX82-1-ALR VX82-1-ANI VX9-4-8IBM VX9-4-8IBX VX9-4-ANIM VX9-4-HALG VX9-4H8IBM

Spare part numbers:
2193831282 | 140122475183 | 140122475316 | 140122475340

https://proex.sk/produkt/rucka-hadice...
https://www.proexservis.sk/nahradne-d...
https://www.proex.sk/
#diy #handle #replacement #vacuumcleaner #remotecontrol #repair #electrolux #assembly #disassembly