Chevrolet Traverse - FRONT LEFT (DRIVER'S) DOOR PANEL REMOVAL (2013 - 2017)

Step-by-step guide on how to change / remove / replace front drivers interior door trim panel on Chevy Traverse SUV ( 2013 | 2014 | 2015 | 2016 | 2017 | LS | LT | LTZ | 3.6 | AWD).

Support the channel and get extra perks as a Channel Member:
   / @quitealright  

Driver's door trim panel is being held by three torx T30 screws. Remove the screws as shown in the video. Then use a larger trim tool to pop out the door panel. Be careful not to brake small white plastic trim screws which are holding the panel in place. Lift the panel up and remove from door lock knob. Then carefully disconnect door handle cable and disconnect all wiring. That's it.

If you are replacing window switches, unfortunately on 2013 - 2017 models you will have to completely remove the door panel.

THIS VIDEO IS AVAILABLE IN DIFFERENT LANGUAGES!
Press Settings under the video and then Audio Track!

Thanks for visiting my channel.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.