How to Replace Starter 2010-2013 Ford Transit Connect

Buy Now!
New Starter from 1AAuto.com https://trq.video/ib-1AEST00556

This video shows you how to install a new starter on your 2010-2013 Ford Transit Connect. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.

This repair was done on a 2013 Ford Transit Connect XL 2.0L Mini Cargo Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect

Tools you will need:
• 10mm Socket https://trq.video/oaRk-1AXAA00017
• 13mm Socket https://trq.video/oa83-1AXAA00015
• Ratchet https://trq.video/objP-1AXAA00016
• Torque Wrench https://trq.video/oapR-1AXAA00044
• Sandpaper
• Pick https://trq.video/oFJ-1AXAA00037
• Razor Blade / Gasket Scraper

Subscribe:    / @trq  

Check out our playlist:
Ford Transit Connect 1st Generation 2010-2013:    • Ford Transit Connect 1st Generation 2010-2013  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.