Making a Tabletop Mini Airbrush "Spray Booth" - Workshop 3D printing N’stuff

This is how we made a 3d printed DIY tabletop mini spray booth.
Obviously it’s missing the actual "booth", or top and side wall protections.
But honestly. If you have used an airbrush for more the a couple of hours, you know this isn’t a problem for airbrushing details. Make sure to place the "spray booth", on a surface that you don’t mind getting paint on.
Hope you enjoy it.

Want to support our passion on this channel? https://paypal.me/propsnstuff
Or consider giving us a YouTube Super Thanks😉
And we will keep the video build’s coming!

⬇️ Social Media:
PropsNstuff on Instagram: Instagram.com/propsnstuff
Something to say: [email protected]
PropsNstuff on YouTube:    / propsnstuff  

⬇️ Her you’ll find the 3d model’s STL files.
https://www.cgtrader.com/3d-print-mod...

Everything else you’ll need to build your own.
8 x M4 35mm screws, with washers & bolts.
2 x Brushless 120mm x 240mm Computer Case Fans, with a power supply
One roll, or bulk pieces. Of spray paint filter.

⬇️ Affiliate links to everything we used.
Two 120mm x 240mm fans, with regulator:
https://amzn.to/4koizeJ
A large roll of Airbrush filter:
https://amzn.to/3F2l1HJ
And you will need 8 x 35mm M4 screws with washers & nuts.
Here is the link to the screw kit we used:
https://amzn.to/4bplfVj

⬇️ For airbrushing paints, we only use non-toxic acrylic paints from Green Stuff World.
Opaque Paint Set - Flesh Color’s
https://www.greenstuffworld.com/en/pa...
And the, Paint Set - Flesh Tones
https://www.greenstuffworld.com/en/pa...

And if you want to go big, with an instant ultimate awesome paint collection;)
Green Stuff World Basis Mega Paint Set vol 1:
https://www.greenstuffworld.com/en/pa...
Green Stuff World Basis Mega Paint Set Vol 2:
https://www.greenstuffworld.com/en/pa...

Please note that these are affiliate links. And by using them, you’ll be supporting this YouTube channel at no cost to you.

————————————
Chapters
0:00 Opening
0:20 Intro
1:05 Mini Spray Booth
4:50 Testing
7:07 Outro
————————————
Including the PLA filament used. It ended up costing about 45US $. And that is with 11 additional filter replacement cutouts & a screw box.
All assuming you have, or have access to a 3d printer of course.

We’re just a passionate married couple of hobbyist, that loves to make Props and other Stuff.
And so we are sharing this video build just for the love of all things creative, and hoping to inspire others to the wonderful world of Making.

Remember. We are only amateurs at this.
So if you rely on the information shown or voiced in this video, you do so at your own risk. Read the labels of all glues, paints and other materials you use, as well as tools and machines you use and always follow the proper instructions and safety rules. And naturally, all the opinions voiced or shown in this video are only our own opinions. Have fun & stay safe!