How to Install SuperATV's MaxDrive Powered Flip Windshield for the Polaris Ranger XP1000

Braden is going to show you how to get the ultimate windshield control installed and in your hand. With SuperATV's MaxDrive Power Flip Windshield installed on your Polaris Ranger 1000, you can ride year-round regardless of what Mother Nature has in store. In seconds you can open, close, or set it to any position in between with the flip of a switch and without having to leave your seat. It's a great way to ride whenever you want and be prepared for whatever the day has in store.

00:26 – Tool list
00:31 – Confirm fitment and remove the protective screen from the windshield
00:49 – Install the bulb seal
01:58 – Install lower bracket to the lower portion of the windshield
02:49 – Install upper bracket to the upper portion of the windshield
03:24 – Fully tighten the bracket hardware
03:40 – Install female hinges to the windshield
04:21 – Install actuator brackets
05:06 – Install the opposite side actuator bracket
05:33 – Fully tighten actuator brackets
06:22 – Remove the roof hardware from the machine
06:38 – Apply gasket to the top lip of the machines cage
07:07 – Mount the windshield to the machine
07:23 – Install the male portion of the hinge to the female portion and secure to the machine
09:32 – Fully tighten the hinge hardware
09:49 – Install driver side actuator brackets to clamp
10:49 – Secure driver side clamps to the cage
11:40 – Install driver side actuator
12:57 – Adjust driver side bracket and actuator to fit the machine
13:55 – Repeat same steps for the opposite side
15:16 – Tighten all the hardware
16:33 – Remove cup holder center and feed the actuator electrical harness
18:16 – Rewire the actuator electrical harness to the machine
22:53 – Install the rocker switch
23:35 – Test the rocker switch
23:44 – Manage any loos cords
25:25 – Reinstall cup holder
25:41 – Test out the windshield

Ready to pick up your MaxDrive Powered Flip Windshield? Visit superatv.com today!
https://www.superatv.com/polaris-rang...