How to Replace Water Pump 2006-2010 Hummer H3 3.7L

Buy Now!
New Engine Water Pump from 1AAuto.com https://trq.video/id-1AEWP00105

This video shows you how to install a TRQ water pump in your 2006-2010 Hummer H3 3.7L. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.

Estimated installation time for a professional technician is approximately: 2 hours 12 minutes

This repair was done on a 2007 Hummer H3 X 3.7L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2006 Hummer H3
2007 Hummer H3
2008 Hummer H3
2009 Hummer H3
2010 Hummer H3

Tools you will need:
• Flat Blade Screwdriver
• Pry Bar https://trq.video/oazG-1AXAA00020
• 10mm Wrench
• 10mm Socket
• 13mm Socket
• 19mm Deep Socket
• Coolant Funnel Set
• Hose Clamp Pliers https://trq.video/okX-1AXAA00076
• 1/2 Inch Impact Gun
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/ob7I-1AXAA00044
• Gloves https://trq.video/ocKV-1AXSS00048
• Paper Towels
• Safety Glasses
• Sandpaper
• Transmission Fluid
• Drain Pan
• Floor Jack
• Funnel
• Jack Stands
• Pick https://trq.video/oapn-1AXAA00037
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.