LED SHOWDOWN - Philips X-tremeUltinon LED vs everyone

Hi everyone! In this video we'll compare the most requested LED, the Philips X-tremeUltinon with some of the most powerfull LEDs available on the market. From Osram, Infitary, Bevinsee, Novsight, Auxito and Boslla. We'll test everything from their light output to their endurance to find out which is the best choice for you.


This video was supported by ANNKE. Find out more about them at the links below:
20% Off code - WIRELESS20
4MP AI Wireless Security Camera Link - https://www.annke.com/products/w300?u...

The code is also applicable for other wireless solutions.
2MP Wireless Security Camera Set W/10.1" Monitor and 1TB Hard Drive - https://www.annke.com/products/wl200?...
Wireless Security Camera Seti (Need Purchasing Separate Hard Drive) - https://www.annke.com/products/ws200?...



If you wish to support the channel, you can follow the link and become a Patreon: https://www.patreon.com/user?u=26494467


Follow me here:
Facebook:   / sergiu.gabor.youtube  
Instagram:   / sergiu.gabor  
Twitter:   / gabor_sergiu  

Contact me at:
[email protected]

Links for the products:
Apollo X7
https://www.x7sevenusa.com/product/x-...

Bevinsee V45
https://www.aliexpress.com/item/10050...

Novsight Green (Novsight N52)
http://www.amazon.com/dp/B099872STC

Infitary
https://www.amazon.com/INFITARY-Headl...

Boslla RGB
https://www.boslla.com/product/rgb-pro/

Boslla FOG
https://www.boslla.com/product/boslla...

About the Rating:
At the end of the video, I thought that it would be a nice idea to have a rating for the products that I test. So, based on the general 5 star rating used all over, I made my rating to better suit my personality. The rating is based on my testing and my opinion of a specific product. It takes into consideration many factors like performance, reliability, availability and many other aspects which are essential to a consumer. Of course, some of these factors may not be applicable to other regions or demographics. As price is another factor in this rating, a product may be cheaper in other regions, rendering my rating as inadequate. In this case, you should reconsider if the product is suitable for you or not.

About the tests:
Light output - This parameter was measured using a specific instrument called the Lux meter. As the name implies, this measures the LUX value of a specific light source. In other words, the amount of light that is hitting a surface. Compared with Lumen, which describes the total light output of a light source in all directions, Lux is more relevant in this case because it measures the light projected by the headlight. For example, a poorly designed headlight bulb with a high lumen rating will not focus the light properly. therefore it will have a bad Lux reading. We are interested in road illumination, not specific bulb brightness. The test was performed using a projector type headlight and a reflector type headlight. The headlight units were positioned at 3 meters from the projection surface, where the measurement was made. Every bulb was powered using the power supply set at 14 volts. Both headlights are used to recreate real life usage. In general, projector headlights offer less light output because the light needs to pass through an additional medium (the lens) which, with time, can get dirty. Moreover, projectors have a smaller mirror further contributing to its lower light output.

Efficiency loss - This parameter was measured using a TSL2591 High Dynamic Range Digital Light Sensor positioned at 30cm from the light source. The code used to run on the Arduino was configured to record a reading every second for 30 minutes. All bulbs were powered at 14V.

Real wattage - This was measured using a high accuracy power supply. The bulbs were powered at 14V. By multiplying the volts with the amps, the real wattage can be determined. NOTE: some of the power consumption is reserved for cooling.

0:00 - Intro
1:02 – Product overview
3:25 – Dash warning light test
3:40 – Real power test
3:55 – Light output test
5:20 – Light output test results
7:19 – Thermal management test
8:42 – Efficiency test
10:30 – Noise test
11:22 – Endurance test
12:25 – Conclusion and rating
18:38 – Outro