HVAC Flaring Tool (FSPIN300) Will Save You TIME And MONEY!

HVAC Flaring Tool (FSPIN300) Will Save You TIME And MONEY!

Today we take a look at the FSPIN300 Flaring Kit!

FSPIN300 Flaring Tool Drill Bit Set With 1/4’’ 3/8’’ 1/2’’ 5/8’’ 3/4" Bits For Soft Copper & Aluminum Tubing Designed for the most common tubing diameter in HVAC, the Spin Tools preserve copper’s/aluminum’s malleability while doing the flaring, avoiding cracks and leakage.

Features: 5 Piece Set with the most common HVAC tubing diameters

Revolutionizing system for molding tubes using heat by friction

Way more surface of contact between the flare and the valve

Right flaring size, every single time Up to 10x faster than the conventional tools: flares in 5 seconds!

Preserves copper/aluminum malleability while doing the flaring, avoiding cracks and leakages

Drill Minimum Requirements : The SPIN tools are designed to work along with drills and/ or screwdrivers, with minimum of 1,800 RPM and 500 watts for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills. Using the SPIN tools along with less powerful equipment may result in high decrease of performance. Tubing Wall Thickness The Flaring Spin tools are designed to work with copper tubing of 1/4’’, 3/8” and 1/2’’ with wall thickness of up to 0.8mm, and up to 1.0mm for the 5/8’’ tubing diameters.

Let us know your thoughts and experiences in the comments section below!