How to service and clean your snow foam gun or lance and convert it to quick disconnect
Автор: Neil Magill
Загружено: 2020-05-30
Просмотров: 546
How to service and clean your snow foam gun or lance and convert it to quick disconnect
My snow foam lance was due a service and while I had it apart, I thought I should convert it over to the increasingly common quick disconnect fittings.
Really the principle is to remove the filter/gauze and injector, soak them in descaler solution and re-seal everything. The quick disconnect fitting simply replaces the metal pipe and in my case, the Karcher bayonet fitting.
Both the filter and injector were very clean and showed no signs of being blocked. I always rinse the lance after use, so I guess that works.
This was a pretty straight forward job, just make sure you have the following tools to aid you.
14, 22, 24mm hex spanners
Vice grips
Hammer
Drift
Descaler solution
PTFE Tape
Some links to help...
Oust Descaler
http://ebay.us/qCwzGw
PTFE Tape
http://ebay.us/pFiBl7
Timestamp
0:00 Intro
1:55 Disassembly
6:40 Cleaning
9:36 Reassembly
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
