How to Replace Lower Ball Joint 07-14 Toyota FJ Cruiser

Buy Now!
New Ball Joint Set from 1AAuto.com https://1aau.to/ia-1ASFK04001

1A Auto shows you how to repair, install, fix, change or replace loose, worn, or creaking ball joints. This video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, Toyota FJ Cruiser.

This repair was done on a 2007 Toyota FJ Cruiser Base 4.0L and the process should be similar on the following vehicles:
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser

🔧 List of tools used:
• 19mm Socket
• 21mm Socket
• 24mm Socket
• Ball Joint Press
• Blowtorch
• Pickle Fork
• Pliers
• Side Cutters
• 1/2 Inch Breaker Bar
• Ratchet
• Torque Wrench https://1aau.to/oqf-1AXAA00044
• Rust Penetrant
• Floor Jack
• Hammer
• Jack Stands

Subscribe:    / @1aauto  

Check out our playlist:
Toyota FJ Cruiser 2007-2014 1st Gen (XJ10):    • Toyota FJ Cruiser 2007-2014 1st Gen (XJ10)  

For More Info visit us at https://1aau.to/h-bL6

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.