Bambu Lab H2C 0.6 Nozzle Prints: Leah Lamp Shades — Seam Fix Attempts — Scarf Joint Vase Mode Tests
Автор: Layer Fusion
Загружено: 2026-01-21
Просмотров: 11
Printing with a 0.6mm nozzle on the Bambu Lab H2C — and overall the print quality is genuinely really good… until a proper seam line shows up on a customer-facing print.
In this video I test Scarf Joint using a Maker World cylinder pair (Scarf Joint vs regular seam), then try applying it to a real lampshade print. I also hit a key discovery while editing: the model wall is 0.8mm, while the profile defaults to about 0.62mm on a 0.6mm nozzle (single perimeter), which may affect how the wall (and scarf joint) is generated.
I also run vase mode tests: two failures (caught by spaghetti detection), a control print in normal mode, and one vase mode success… with a twist.
Not sponsored — I bought the H2C with my own money.
These shades are not my design and I’m not allowed to share the files — they’re Leah’s shades from Maker World.
Chapters
00:00 Disclaimer + intro
00:14 Seam problem (why I tried to fix it)
00:44 Maker World cylinder test (Scarf Joint vs regular)
02:29 Applying Scarf Joint to the lampshade
04:04 Wall thickness discovery (0.8mm vs ~0.62mm)
04:59 Vase mode failures + control test
07:19 Vase mode success + lamp assembly
09:02 Wrap-up + next tests (0.8mm vs 0.4mm)
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
