How to Get Live GPS Sim800 Module RTC Time on Arduino Without Library

Learn how to easily retrieve live GPS time from the Sim800 module to your Arduino without using external libraries. Follow our guide for smooth implementation!
---
This video is based on the question https://stackoverflow.com/q/64191949/ asked by the user 'Electro Tech' ( https://stackoverflow.com/u/13634336/ ) and on the answer https://stackoverflow.com/a/64193788/ provided by the user 'Danny_ds' ( https://stackoverflow.com/u/5708620/ ) at 'Stack Overflow' website. Thanks to these great users and Stackexchange community for their contributions.

Visit these links for original content and any more details, such as alternate solutions, latest updates/developments on topic, comments, revision history etc. For example, the original title of the Question was: How to get live GPS Sim800 Module RTC time on Arduino

Also, Content (except music) licensed under CC BY-SA https://meta.stackexchange.com/help/l...
The original Question post is licensed under the 'CC BY-SA 4.0' ( https://creativecommons.org/licenses/... ) license, and the original Answer post is licensed under the 'CC BY-SA 4.0' ( https://creativecommons.org/licenses/... ) license.

If anything seems off to you, please feel free to write me at vlogize [AT] gmail [DOT] com.
---
How to Get Live GPS Sim800 Module RTC Time on Arduino Without Library

If you're working on a project involving an Arduino and a GPS module like the Sim800, you may want to tap into real-time clock (RTC) data. However, doing this without using libraries can present some challenges. Many users encounter difficulties when trying to retrieve accurate time data from the Sim800 module, often resulting in incorrect or garbage data after a single correct output. Today, we’ll go through how to accurately get live RTC time from the Sim800 module to your Arduino without the need for any libraries.

Understanding the Problem

To start with, many Arduino enthusiasts have faced similar issues:

Correct Data but Intermittent Errors: After retrieving the correct time, subsequent outputs can be garbled or nonsensical.

Delay Issues: Removing delays can lead to increased error rates in the output, leading to confusion and incorrect data reporting.

Need for a Simple Code: Users often want a straightforward solution without additional complexities of libraries.

In this guide, we’ll address these issues and provide you with a code example that will help you fetch live GPS time effectively.

Step-by-Step Solution

Step 1: Set Up Your Environment

Required Libraries: Ensure you have SoftwareSerial.h included in your Arduino IDE, as it will allow your Arduino to communicate with the Sim800 GPS module efficiently.

Connections: Connect the Sim800 module to your Arduino. Here's how to set it up:

Connect the TX of the Sim800 to pin 10 on the Arduino

Connect the RX of the Sim800 to pin 11 on the Arduino

Step 2: The Code

Here’s a simplified code snippet you can use to retrieve the live RTC time from your Sim800 module:

[[See Video to Reveal this Text or Code Snippet]]

Step 3: Running and Testing

Upload Code: Upload the code to your Arduino.

Monitor Output: Open the Serial Monitor in your Arduino IDE. Ensure it is set to 9600 baud.

Observe Behavior: Check for outputs and verify that the data being printed is accurately reflecting the current time.

Troubleshooting Common Problems

If you experience issues after implementing this code, consider the following tips:

Adjust the Delays: If you still encounter garbage outputs, experiment with increasing the delay timings to allow the module more time to respond before reading the data.

Check Connections: Double-check your wiring from the Sim800 module to the Arduino to ensure there are no loose connections.

Review Your Power Supply: The Sim800 module often requires more current, especially during transmission. Ensure that it is adequately powered.

Conclusion

By following this guide, you should now be able to retrieve live GPS RTC time on your Arduino using the Sim800 module without any libraries! This simple method will help you integrate GPS functionalities into your projects smoothly.

Feel free to experiment with the code and make it fit your needs. Have fun with your Arduino projects, and keep on building!