CS7.1 Build Series - Electronics

In this video of the cs7.1 build series, we will assemble the electronics enclosure, upload Arduino code and test the system.

Project Website:
https://www.reloadingrecipes.com/Head...

If you missed the release video which gives an overview of the project, check that out here:
   • AI Case Sorter 7.1 is here....finally!!!  

All code and files referenced in this video as well as the parts list can be found in the GitHub Repo at:
https://github.com/sjseth/AI-Case-Sor...

I highly recommend you check out the Instructions.PDF at:
https://github.com/sjseth/AI-Case-Sor...

CS7.1 Build Series Video List #
Classifier Assembly -    • CS7.1 Build Series - Classifier Assembly  
Electronics -    • CS7.1 Build Series -  Electronics  
Sorter Assembly -    • CS7.1 Build Series -  Sorter Assembly  
Camera Module -    • CS7.1 Build Series - Camera Module  


00:00 - Introduction
00:14 - Arduino UNO - Code and Testing
02:17 - Pre-Wiring Setup and Identification
04:02 - Installing Jumpers
04:45 - Installing TCM2209 Motor Controllers
06:10 - New Arduino - Connect to Shield
06:51 - Creating our 12v Rail
07:35 - Power Connector
08:15 - Creating the 5v Rail
09:12 - Proximity Sensor
09:58 - Homing Sensors
10:56 - Camera Lighting & Fan Wire
11:52 - Motor Wires
12:50 - Testing the electronics
13:18 - Testing Camere and Adjustments
13:50 - Installing 1.2k Resistor
15:08 - Setting vRef on TCM2209
16:50 - Stuffing the box
17:13 - haha
17:20 - Enclosure Fan
18:18 - Installing Dimmer
18:40 - 12v Jack
19:00 - Connecting Jack to Power Switch
19:25 - Mounting the UNO
19:50 - Installing Shield
20:15 - Wiring up the rest
20:38 - Stuffing the box...again
21:07 - Connect to the System and Testing
22:18 - Fruits of our Labor!