Hotpoint Core NSWM846 - White 90° (Full cycle)

Washing a half load of towels on White 90° with 1400rpm in the Hotpoint NSWM846!

White (or white cotton) is the normal cottons cycle compared to cottons which is actually cottons eco. The machine took off about 40 minutes after sensing, making the main wash shorter and the (adaptive) rinses use less water, but still topping up when needed. It heats in stages and ends the heating phase with a static heat. But it only reached about 75° which is not that good in my opinion... Nice deep cool down after the main wash though 😍. The interms do slow ramp ups which means it gets less sensitive, except for the final spin where it gets a little more sensitive so that it's quieter. I think it handled the towels load quite well in terms of balancing, it didn't mess around too much! The final spin is a bit weird on the other hand. Compared to the previous models (NS* **5 series for example) which held 1400rpm for about 1-2 ,minutes, this final spin is horrible. It only holds 1400rpm for a whopping 10 seconds before slowing down. Such a shame as I do like how this sounds at max speed.

Used programme/options:
Programme: White
Temperature: 90°
Rinses: 2
Spin: 1400rpm
Options: None
Load: Towels

Index:
0:00:00 Loading, detergent, programme
0:01:19 Start, Pre-fill & Detergent dispensing
0:04:50 Saturation
0:10:20 Heating to 90°
1:07:22 Static heat
1:10:40 Main wash at 90°
1:22:43 Cool down
1:27:13 Intermediate spin 600rpm
1:33:09 First rinse
1:39:18 Intermediate spin 1000rpm
1:48:20 Final rinse
1:55:48 Final spin 1400rpm
2:13:50 Anti crease
2:15:27 Finished

Instagram: @hfwasmachines
Subscribe for more! ;)
Enjoy!