Problem red led Xiaomi Yi Action Cam 2K (RESOLVED) 2020

After having seen numerous videos, today (1 May 2020) I managed to make the yi action cam work with the red led problem.
Sorry if I could not register while doing all the steps but I did not think it was successful.
I hope the video has been helpful and I invite You to leave a LIKE and Subscribe to the channel. Thanks.

MY SETUP:
Notebook asus - win 10
Xiaomi yi action cam 2k serie: 26l
Microsd: samsung 64gb evo plus
MICROSD-SD adapter kingston
USB-MICRO USB cable from samsung smartphone
SD MEMORY CARD FORMATTER version: 5.0.1

WHAT WE NEED:
1) Personal computer
2) USB-MICRO USB cable
3) MICROSD-SD adapter
3) Software SD MEMORY CARD FORMATTER: https://bit.ly/3d4VDO3
4) Latest version of the firmware: https://bit.ly/2KSI6Nr
APP YI ACTION CAM:
IOS: https://apple.co/2KTRbFW
ANDROID FROM APTOIDE STORE: https://bit.ly/2StQgjI

STEPS:
1) Insert the micro sd card in the adapter and connect it to the personal computer.
2) Formatting the micro sd with sd memory card formatter (previously installed)
3) Download the latest firmware version
4) Insert the latest version of the firmware inside the micro sd and subsequently remove the usb device.
5) Insert the microsd inside the camera and connect the camera to the personal computer via usb cable.
6) Turn on the cam, the red led will turn to blue and the cam will update. You will hear several beeps and then the cam will turn off.
7) Disconnect the cam from the pc and connect it to the power outlet.
8) The camera will recharge and work again. Activate wifi and connect it to an android device.