Unboxing a Revolutionary Laser Machine: xTool P2 CO2 Laser Machine

Let's unbox xTool P2 CO2 laser cutter and very first time to do the test!

P2: https://social.xtool.com/4hAyjcv

00:00 - Unboxing
00:24 - Check the casing of the machine
00:27 - Move the machine to a place where you remove its rear cover
00:33 - Open the lid and take out the items from the machine
00:49 - Remove the screw that fixes the baseplate
00:53 - Take out the foam and acrylic sheets
01:20 - Parts intro
01:25 - Remove the instruction sticker and the sticker used to prevent the lid from locking
01:32 - Open the rear cover, and fill the water tank with antifreeze and purified water
01:52 - Press the cap down and rotate it clockwise to open it
02:06 - Connect the machine to a power supply after the first filling
02:09 - Reset the emergency stop switch
02:13 - Turn on the machine and wait for the liquid to go into the laser tube
02:18 - Turn off the machine to complete the second filling, observing the water level and pouring the purified water in slowly to avoid overflow
02:27 - Close the cap, place the rear cover back, and tighten the screws that fix it
02:54 - Install the smoke exhaust pipe
02:57 - Place the other end of the pipe to the open air or connect it to an air purifier
03:15 - Optical path calibration
04:36 - Testing

xTool Social Media
Instagram:   / xtool.official  
Facebook:   / xtoolofficial  
Tiktok xtoolofficial:   / xtoolofficial  
Tiktok xtool_smallbusiness:   / xtool_smallbusiness  
Reddit:   / xtoolofficial  
xTool Designfind: https://social.xtool.com/3WnCccn
Twitter:   / xtoolofficial  
Pinterest:   / xtoolofficial  
LinkedIn:   / xtool-official  

Join us to get more latest news!