BOO Slope Glider - Flight Review

In this video I'm reviewing the BOO Slope Glider from Robbe Modellsport in flight. The BOO is a micro size slope glider with a wingspan of 800mm and a weight of around 180 grams. Despite its light weight and small size the BOO can handle conditions from light to strong winds. Flying the BOO is really a blast. I was totally surprised about how well the BOO was flying even in strong wind conditions. All the recommended settings worked very well for me and there was no need for any changes. With its pocket size the BOO is always ready for a short stop-over at your favorite slope. Just insert the battery and the fun begins. The BOO is not for beginners. You should already have some 3-axis experience before flying the BOO. If you’re not into building but still want to fly the BOO then I have good news for you. Robbe is introducing the BOO in an ARF version. Check out the links below.

Link to Robbe Modellsport: https://www.robbe.com/de
Direct link for ordering the BOO: https://www.robbe.com/de/Flugzeuge/Fl...
Direct link for ordering the BOO ARF yellow: https://www.robbe.com/de/Flugzeuge/Fl...
Direct link for ordering the BOO ARF violett: https://www.robbe.com/de/Flugzeuge/Fl...

Link to my BOO Time Lapse Build Video:    • BOO Slope Glider - Time Lapse Build  

Specs:
Wingspan: 800mm
Length: 481mm
Wing area: 7.8 dm2
Weight (AUW): 191g (in my configuration) incl. 11g GPS Logger
RC functions: elevator, rudder, ailerons

My configuration:
Battery: Robbe Modellsport RO-POWER ULTRA HP 320MAH 7,4 VOLT 2S 25(50)C
Receiver: Graupner GR-12L HoTT, 6 channel
Servos: 4x KST X06-V6
GPS Logger: SM GPS logger 3

Covering film:
ORALIGHT transparent red

Decals:
d-c-fix white semi gloss viny

Cameras:
Canon EOS 90D (ground to air)
Sony HDR-CX730 (build)

Big thanks to my daughter for giving everything while filming the BOO. That was not easy as the BOO is tiny and the wind was strong. Great job!


Microphone:
Rode VideoMicPro
Rode NTUSB (for voice-over)