TIMER Function of RC8X

Enter main menu--Tools menu--Timer.
Alarm time is the time to trigger the alarm. When the current time reaches the alarm time, the transmitter will alarm.
I set the alarm time to 1 minute.
Mode: There are two modes available, including UP timer and DOWN timer.
UP timer means the timing starts from 0.
DOWN timer means the timer starts counting down from the set time.
I set Down timer.
Voice is to the alarm sound for the timer function.
Null means there is no alarm sound when the current time reaches the alarm time.
For type 1, when the current time reaches the alarm time, there will be an alarm sound for 2 seconds.
For type 2, there is a sound reminder every second during the timing process. And when the current time reaches the alarm time, there will be an alarm sound for 2 seconds.
I set type 1.
Start: A switch can be used to start the timing, such as PS1 to PS 5, steering wheel and throttle trigger.
I assign throttle trigger to start the timing.
RESET: A switch can be used to stop the timing and reset the timing. The switches available are the same. When the timing has started, press the reset switch once, the timing will stop. Press the reset switch again, the timing will reset to the original values.
I assign PS1 to stop or reset the timing.
Vibrator is to set the vibration for the timer function.
Null means there is no vibration when the current time reaches the alarm time.
For type 1, when the current time reaches the alarm time, the transmitter will vibrate for 2 seconds.
For type 2, there is vibration every second during the timing process. And when the current time reaches the alarm time, the transmitter will vibrate for 2 seconds.
I set type 1.
Now, I’ll show the timer function.
Push the throttle trigger to the maximum position to start the timing.
During the timing, I can press PS1 to stop the timing.
And push the throttle trigger to start the timing again.
When the timing stops, there will be alarm sound and vibration for 2 seconds.
Reset it.
Desktop click timer is for you to control the timer on the desktop.
If it is turned on, you can control the timer on the desktop.
Here is the timer function.
Tap the timer here once, the timing will start. Tap it again, the timing stops. Tap it once again, the timing will reset.
If it is turned off, you cannot control the timer on the desktop.

For more details of RadioLink RC8X:
https://www.radiolink.com/rc8x

Purchase link of RadioLink RC8X:
https://www.radiolink.com/rc8x_where_...

You can send mails to [email protected] if you have any questions during using our products.

#fpvracing #fpv#rctransmitter #radiolink #rc8x