Honda NC750X Tappet Valve Gap Check | The Correct Way

Hello and welcome to the video, today im going to show you how to check and adjust the valve clearances on a 2014 Honda NC750x. This video is relevant for all nc750 variants from 2013 to 2020.

this check should be performed every 16000 miles, common symptoms are poor cold starting, lumpy at particular revs, stalling and rough idle.

Tools required are. 6mm allen key, 17mm socket, 10mm socket, 6mm socket, 5mm Allen key, 10mm allen key, Philips screw driver, spark plug socket, flat head driver, feeler gauge, pliers, and some coolant. oh and 2 hours of your time.
👍 Like, Subscribe & Ride Safe!

If you're into motorcycles, cafés, and spontaneous road trip vibes, you're in the right place. Hit that like button, subscribe for more two-wheeled adventures, and let us know your favourite camping spots or ride routes in the comments!

To support the channel please buy us a coffee, all proceeds go back into making the channel bigger and better:
https://www.buymeacoffee.com/mototoken

Follow us on socials:
  / mototoken  
  / mototoken  

Get our recommend products with discount:
Jodie's Nav System: https://aoocci.com/?ref=igzkcclp (22 % Off)*

Vintage Motorcycle Gear: https://fogygarage.com?sca_ref=269952... (use code NickJo10)* (10% Off)

Our Rider 2 Rider Intercoms: https://www.fodsports.com/
(use code MOTOTOKEN)* (15% Off)

*(if you use the above link/s I will get a small amount of commission)