Door Lock Cylinder Replacement

Did our video help you? If so, consider buying us a beer: https://bit.ly/3feE6tJ

In this video we show you how to remove a door lock cylinder from your door without removing the door handle & we show the procedure to program a key fob to your Toyota VIP RS3200 factory alarm system (1999-2002 only).

Programming Instructions: 99-02 4Runner Keyless Entry factory issued remotes:

1. Start with the following conditions: you are in the vehicle

a. Key is out of the ignition
b. Drive door is open ( all other doors are closed)
c. Driver door is unlocked (other door locks don't matter)

2. Insert the key into the ignition (don't turn it) and pull it out.

3. Perform these steps within 40 seconds:

a. Cycle the power locks 5 times. Use an even pace & try
to go relatively fast.

b. Close, then open the drivers door.

4. Perform these steps within 40 seconds:

a. Cycle the power locks 5 times (same as before).
b. Turn the ignition to ON then back to OFF.
c. Turn the ignition to ON then back to OFF.
d. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should cycle (automatically)
indicating successful entry into programming mode. Return to step 1
if the locks do not cycle at this point.

6. Perform these steps within 40 seconds:

a. Press the LOCK and UNLOCK buttons on the transmitter
simultaneously for 1 second.

b. Immediately after letting go of the lock and unlock buttons,
press the lock button by itself and hold for 2 seconds.
Within 3 seconds, the door locks should cycle ( LOCK then
UNLOCK) once-- indicating successful programming. If
the door locks don't cycle, or cycle twice. Repeat steps
6a and 6b--this remote has not been accepted.

c. Repeat steps 6a and 6b for EACH transmitter that will
operate the vehicle. Including any old transmitters.

7. Close the driver door.


**Injection Fob for OEM fob replacement:
https://www.ajtdesign-llc.com/online-...


**The FCC ID used in this video for the 3rd gen 4runner (99-02) is HYQ12BBX
https://www.ebay.com/itm/311780261298...


*HELPFUL TOOLS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
https://www.amazon.com/shop/timmythet...

*Small Pick Tool Set
- (used to remove door cylinder clip)
https://amzn.to/2MyN4AH

*JIS Screwdriver
- (used to remove phillips style screws which are actually Japanese Industrial screws on Toyota vehicles. A JIS screwdriver will fit the screw heads better)
https://amzn.to/31nlP0f

*Auto Trim Removal Set
- (nice for removing interior plastic trim like the door panel)
https://amzn.to/37vgzvH

*20 Piece Screwdriver Set
- (Used a flat blade screwdriver for this job. This is a nice kit to have if you're in the need of a good set)
https://amzn.to/34aLrQ1

*Plastic Spudger Tool - (Use to help disconnect electrical connector and easy prying applications so you don't damage that item you're prying on)
https://amzn.to/35c6GCc

**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates, we earn from qualifying purchases.