2022 SSR SR300S Oil Change/Air Filter MY WAY

TThis video is a guide on how to perform an oil change and air filter cleaning on a 2022 SSR SR300S dirt bike.

Here's a summary:

Oil Change:

1. Tools Needed: 17mm wrench, 8mm wrench, extension, gloves, oil, clean rag, oil container, and a flathead screwdriver. (1:34)
2. Drain the Oil: Unscrew the top engine breather to allow faster oil flow, then use the 17mm wrench to loosen and remove the drain plug. (2:18, 3:21)
3. Inspect the Drain Plug and Oil: Note any metal particles on the magnetized drain plug and check the oil's color and consistency on a rag. (3:38, 4:16)
4. Empty the Oil Completely: Lean the bike to drain out as much oil as possible, then screw the drain plug back on loosely. (4:36)
5. Clean the Oil Filters: Use an 8mm wrench to remove the two air filters, carefully remove the filters and clean them thoroughly with parts cleaner, ensuring they are completely dry before reinstallation. (5:22, 8:35)

Air Filter Cleaning:

1. Remove the Airbox: Unscrew the battery holder and disconnect the electrical components to access the airbox. (17:44)
2. Clean the Airbox and Filter: Thoroughly clean the airbox with parts cleaner, then wash the filter in gasoline until it's clean and dry. (18:02, 18:27)
3. Reinstall the Air Filter: Oil the filter and carefully place it back into the airbox, then reassemble the airbox components. (18:59)

Oil Refill:

1. Measure the Oil Quantity: Consult the owner's manual for the correct oil amount, then use a funnel to pour the recommended 10W40 oil into the engine. (13:48, 14:13)
2. Check the Oil Level: Start the engine for a few seconds to circulate the oil, then turn it off and check the oil level with the dipstick. Add more oil as needed until it reaches the full mark. (15:14)

Important Notes:

The video emphasizes the importance of regular oil changes for maintaining engine health. (13:42)
Always use the recommended oil type and viscosity specified in the owner's manual. (13:19)
Be careful when handling hot engine parts during the oil change. (16:39)

By following these steps, you can successfully change the oil and clean the air filter in your SSR SR300S, saving money and gaining valuable maintenance knowledge.his video is a guide on how to perform an oil change and air filter cleaning on a 2022 SSR SR300S dirt bike.

Here's a summary:

Oil Change:

1. Tools Needed: 17mm wrench, 8mm wrench, extension, gloves, oil, clean rag, oil container, and a flathead screwdriver. (1:34)
2. Drain the Oil: Unscrew the top engine breather to allow faster oil flow, then use the 17mm wrench to loosen and remove the drain plug. (2:18, 3:21)
3. Inspect the Drain Plug and Oil: Note any metal particles on the magnetized drain plug and check the oil's color and consistency on a rag. (3:38, 4:16)
4. Empty the Oil Completely: Lean the bike to drain out as much oil as possible, then screw the drain plug back on loosely. (4:36)
5. Clean the Oil Filters: Use an 8mm wrench to remove the two air filters, carefully remove the filters and clean them thoroughly with parts cleaner, ensuring they are completely dry before reinstallation. (5:22, 8:35)

Air Filter Cleaning:

1. Remove the Airbox: Unscrew the battery holder and disconnect the electrical components to access the airbox. (17:44)
2. Clean the Airbox and Filter: Thoroughly clean the airbox with parts cleaner, then wash the filter in gasoline until it's clean and dry. (18:02, 18:27)
3. Reinstall the Air Filter: Oil the filter and carefully place it back into the airbox, then reassemble the airbox components. (18:59)

Oil Refill:

1. Measure the Oil Quantity: Consult the owner's manual for the correct oil amount, then use a funnel to pour the recommended 10W40 oil into the engine. (13:48, 14:13)
2. Check the Oil Level: Start the engine for a few seconds to circulate the oil, then turn it off and check the oil level with the dipstick. Add more oil as needed until it reaches the full mark. (15:14)

Important Notes:

The video emphasizes the importance of regular oil changes for maintaining engine health. (13:42)
Always use the recommended oil type and viscosity specified in the owner's manual. (13:19)
Be careful when handling hot engine parts during the oil change. (16:39)

By following these steps, you can successfully change the oil and clean the air filter in your SSR SR300S, saving money and gaining power.

SSR MOTORSPORTS
https://www.ssrmotorsports.com/
SSR SR300S
https://www.ssrmotorsports.com/store/...

JERSEY/PAINTS
https://oneal.com/
MX Outfit O'Neal Element Warhawk White Men (W32/Medium) Protective Pants Jersey riding bundle motocross dirt bike combo set https://a.co/d/2HW5a3A

GOGGLES
https://www.100percent.com/pages/100-...
100% Accuri 2 Motocross & Mountain Biking Adult Goggles (Blue - Clear Lens) https://a.co/d/hKY4uAs
____________________________________________________________
Filming/Camera
DJI ACTION 4
https://www.dji.com/osmo-action-4 ppl


Contact Information
[email protected]