Electric Recliner Cup Holder Controller MLZB020-B1 From Sofa Rehab

Suitable for electric recliners, couches, and theatre lounges. This armrest cup holder with an integrated 6 button controller has the model number MLZB020-B1 which is distinctly different to MLZB020 & MLZB020-D1 and are not intercompatible. If your electric cup holder has a different model number then go to our website and see our full catalogue of replacement electric recliner cup holders to find the one that suits your recliner.

The inner dimensions of this cup holder MLZB020-B1 is 86mm wide by 97mm deep. The external dimensions are 114mm wide and 100mm deep and requires a hole in the arm of the recliner of approximately 100mm wide.

The cup holder has an integrated controller with 6 buttons (illuminated). The open & close buttons are for the footrest. The up & down buttons are for the headrest. The home button needs to be pressed & held for a second and then it will close the footrest and move the headrest to the upright position.

The light button can be pressed and held for a few seconds and then it will start to cycle through the different light colour options, continue to hold down the light button until you see your preferred light colour and then release the button to set that light colour. The light colour will be remembered once set.

The lights can be synchronised between multiple recliners by linking them and setting the frequency on the switch box as shown in the video.

The purchase of a new MLZB020-B1 cup holder controller from Sofa Rehab is also supplied with a new switch box. The connector for the switch box is a 5 pin plug that you connect to the actuator to control the electric movement of the footrest and headrest. The switch has a second plug for the lights.

This MLZB020-B1 cup holder 6 button controller can be purchased from our website https://sofarehab.com.au/product/mult...