#ajeeshdth

SOLID SF-828 HEVC Full HD Digital Satellite dB Meter
Now you can check audio and video for FTA satellite TV channels
This meter is an upgraded version of SF-810 and comes with HEVC technology.
High Efficiency Video Coding (HEVC), also known as H.265 and MPEG-H Part 2, is a video compression standard
General Features

DVB-S/DVB-S2 Constellation and Spectrum Analyzer supported

4.3 “inch definition TFT LCD screen

Measurement of BER, MER, C/N

CCTV camera Tester supported

13V/18V/22KHz/Lock/Power status display

DISEqC 1.0/1.1/1.2/USALS

Multi-media Payout supported

Multilingual OSD for worldwide use

USB2.0 interface available for software update

LED torch and stereo- loudspeaker inside

4000mAh long-life rechargeable Li-ion battery

Product Overview
Power Key: Press the power key for 3s to turn the unite on/off
LCD Screen: Shows menus and parameters clearly
Power light: Indicates the power status
Red: The unit is switched on or in charging

Red flashing: The unit has been short-circuited

Red/Green alternating flashing: The unit needs to be charged or it is fully charged

Lamp Light: switch on/off the utility LED on the back
22K Hz/ 13V/18V lights: Indicate the 22K Hz/ 13V/18V status
Function keys: F1-F4, to access functions indicated on the display
Arrow key and OK key: Press the arrow key to select the desired function then press OK to confirm
8. MENU key: Enter the main menu
EXIT key: Exit from the present menu back to the previous menu
10. SAT key: To start satellite search
FIND key: Enter the packet control menu, You can find the information about transponders quickly
TV/RADIO: To switch between TV and Radio services
RECALL: Show the previously viewed channel or list
III. Technical parameters

DVB-S/S2 Measurement

Modulation type

QPSK 8PSK 16APSK 32APSK

Symbol Rate

1Mbps-60Mbps

Frequency Range

950MHz-2150MHz

Input Signal Level

-65dBm-25dBm

Input Impedance

75 OHM

AC/DC Adapter

INPUT: AC 100V-240V 50/60Hz OUTPUT : DC 12V/1.5A

Li-ion Battery

5000mAh/ 7.4 Rechargeable

Charge time

About 4 hours

Working time

Around 3-4 hours (fully charged)

Weight

0.6 KG
CCTV Monitor

This model supports a CCTV monitor function, connecting your composite camera signal correctly and pressing the AV button to active

Connect the CCTV camera signal cable with finder BNC to AV
Connect the CCTV camera with the finder via a power cable (12V out interface)
Enter the Main menu – system setting – other power supply: Switch to ON”
Satellite Meter Setup
Installation
Press the MENU key to show the main Menu and enter the satellite installation mode.
#ajeeshdth
#dd
#dish
#dth
#satellitetv
#satellitecommunication
#satelliteradio
#satellitemetre
#satellitefinder
#solid
#sf
#sf828