How to Replace Front Lower Control Arms 2006-2014 Honda Ridgeline

Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK00776
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF00411
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF00412

This video shows you how to install new front lower control arms from TRQ on your 2006-2014 Honda Ridgeline. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

Estimated installation time for a professional technician is approximately: 1 hour 54 minutes

This repair was done on a 2006 Honda Ridgeline RT 3.5L Crew Cab Pickup 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Honda Ridgeline
2007 Honda Ridgeline
2008 Honda Ridgeline
2009 Honda Ridgeline
2010 Honda Ridgeline
2011 Honda Ridgeline
2012 Honda Ridgeline
2013 Honda Ridgeline
2014 Honda Ridgeline

Tools you will need:
• Flat Blade Screwdriver
• Pry Bar https://trq.video/oayt-1AXAA00020
• 17mm Wrench
• 18mm Wrench
• 17mm Socket
• 19mm Socket
• 22mm Socket
• Crowfoot Wrench
• Grease Gun
• Pliers
• Ratchet
• Swivel
• Torque Wrench https://trq.video/ob55-1AXAA00044
• Cotter Pin
• Gloves https://trq.video/ocH5-1AXSS00048
• Rust Penetrant
• Safety Glasses
• 5mm Hex Socket
• Floor Jack
• Jack Stands
• Pole Jack
• Ratchet Strap
• Rubber Mallet
• Wheel Chocks
• Wire Brush https://trq.video/oH6-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
1st Generation (2006 - 2014) Honda Ridgeline:    • 1st Generation (2006 - 2014) Honda Ridgeline  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.