How to Replace Front Outer CV Axle Shaft 07-13 Nissan Rogue

Buy Now!
New CV Axle Assembly from 1AAuto.com https://1aau.to/ia-1AACV00167

1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 07, 08, 09, 10, 11, 12 Nissan Rogue

This repair was done on a 2009 Nissan Rogue and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

🔧 List of tools used:
• Flat Blade Screwdriver
• 15mm Wrench
• 16mm Wrench
• 19mm Wrench
• 21mm wrench
• 10mm Socket
• 13mm Socket
• 16mm Socket
• 19mm Socket
• 21mm Socket
• 32mm Socket https://1aau.to/oV-1AAST00003
• Needle nose pliers
• Needle nose pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench https://1aau.to/ovq-1AXAA00044
• Bungee Cord
• Transmission Fluid
• Center Punch
• Drain Pan
• Floor Jack
• Hammer
• Jack Stands
• Rubber Mallet

Subscribe:    / @1aauto  

Check out our playlist:
Nissan Rogue 2008-2013 1st Gen:    • Nissan Rogue 2008-2013 1st Gen  
CV Axle Replacement:    • CV Axle Replacement  

For More Info visit us at https://1aau.to/h-YZ

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.