How to Replace Front Bumper Impact Absorber 1998-2011 Ford Ranger

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-cS

This video shows you how to install a bumper impact absorber on your 1998-2011 Ford Ranger.

This repair was done on a 2006 Ford Ranger XLT 4.0L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger

Tools you will need:
• 10mm Socket https://trq.video/obpc-1AXAA00017
• 18mm Socket
• 8mm Socket https://trq.video/obpc-1AXAA00017
• Trim Tool Set https://trq.video/oajX-1AXXX00006
• Side Cutters
• 1/2 Inch Impact Gun https://trq.video/ovR-1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet https://trq.video/obNU-1AXAA00016
• Swivel
• Torque Wrench https://trq.video/oaSE-1AXAA00044
• Gloves https://trq.video/oawy-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oagA-1AXAA00068
• Hammer
• Jack Stands https://trq.video/o46-1AXAA00065
• Punch
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford Ranger 1998-2011 3rd Generation:    • Ford Ranger 1998-2011 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.