Internal Spindle Stop for the Mini Lathe - Making a Lathe Depth Stop

Recently I had to make a bunch of parts all to the same lenght and thought to myself how nice it would be to have a depth stop for the lathes spindle so I don't have to measure and adjust every single piece.

The spindle stops you can find on the internet work basically all the same but there was no design that pleases me so I came up with my own.
I hope you enjoy the build process. Let me know what you think about the design in the comments and feel free to ask an give some feedback.

Many thanks to RÖHM Germany who supported me in this episode with a brandnew revolving center from their slim line. This new center fits just perfect to my small lathe. Thanks very much at RÖHM!
Röhm Website: https://www.roehm.biz/
Röhm MT2 revolving center slim line: https://eshop247.roehm.biz/DE-de/norm...

Thanks for watching my videos. Subscribe to the channel for more mechanical and machining content.

My Patreon page:
www.patreon.com/wecandothatbetter

00:00 Intro
00:20 Making the expanding sleeve
04:17 Making the tapered mandrel
06:00 New RÖHM Mt2 revolving center
10:10 Making the knurled locking nut
16:00 Making the knurled locking ring
19:11 Making the hexagon clamping nut
23:17 Final assembly and installation on the lathe