How to Replace Drive Belt Kit 2011-2019 Ford Explorer

Buy Now!
New Serpentine Drive Belt Component Kit from 1AAuto.com https://trq.video/ia-GAEEK00311

This video shows you how to install a tensioner pulley and serpentine belt on your 2011-2019 Ford Explorer. That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage.

This repair was done on a 2015 Ford Explorer Sport 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer

Tools you will need:
• 19mm Socket
• 5.5mm socket
• 8mm Socket https://trq.video/oFe-1AXAA00017
• Serpentine Belt Tensioner Tool https://trq.video/o7-1AXAA00019
• Trim Tool Set https://trq.video/oof-1AXXX00006
• Ratchet https://trq.video/oNN-1AXAA00016
• Socket Extensions https://trq.video/oKh-1AXAA00015
• Torque Wrench https://trq.video/oxb-1AXAA00044

Subscribe:    / @trq  

Check out our playlist:
Ford Explorer 2011-2019 5th Generation:    • Ford Explorer 2011-2019 5th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.