How to Replace Ball Joint 01-07 Volvo V70

Buy Now!
New Ball Joint Set from 1AAuto.com https://1aau.to/ia-1ASFK00627

1A Auto shows you how to repair, install, fix, change or replace loose, worn, or creaking ball joints. This video is applicable to the 00, 01, 02, 03, 04, 05, 06, 07 Volvo V70

This repair was done on a 2003 Volvo V70 and the process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70

🔧 List of tools used:
• Pry Bar https://1aau.to/okn-1AXAA00020
• 18mm Wrench
• 14mm Socket
• 18mm Socket
• 19mm Socket
• T40 Bit
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench https://1aau.to/oxv-1AXAA00044
• Rust Penetrant
• Center Punch
• Floor Jack
• Hammer
• Jack Stands
• Wire Brush https://1aau.to/od9-1AXAA00079

Subscribe:    / @1aauto  

Check out our playlist:
Volvo V70 2001–2007 2nd Generation:    • Volvo V70 2001–2007 2nd Generation  

For More Info visit us at https://1aau.to/h-4Q

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.