Jeep SRT8 - Replacing The Tire Pressure Trigger Modules (Front & Rear)

I went ahead and changed out both the front left and right rear tire pressure trigger module as I was getting a "Check TPMS System" up on the instrument cluster as well as bell chime twice. The thing was so annoying every time I would start the jeep or 20 mins into a drive I would get the warning message as well as the bell chime going off. I decided to plug my autel scanner in and check to see if there were any codes stored in the system. There was so I ordered two new tire pressure trigger modules, one for the front left and one for the right rear. The front left module is located behind the driver side fender liner sitting on the metal frame panel while the right rear module is sitting on the bracket attached to the frame behind the rear bumper. I simply changed them by removing the two screws located on the front left module and removing the bracket for the right rear module. Pulling the red locking tab down releasing the connector and installing the new one's in the same position. Overall, a pretty simple and straight foward install. Couldn't be happy not hearing or seeing anything up on the dash related to the TPMS system.

More stuff coming for the Jeep SRT8..

Stay tuned, more videos are on the way!!!

If anyone is interested in buying some apparel and want to look fly in their new gear.
https://www.evanthemenace.com/
Head over their and gets yourself some new gear!

Also, follow your boy "Whose up to NO good" on Instagram @EvanMenace
  / evanmenace  
&
Also, follow your boy "Whose up to NO good" on Facebook @EvanTheMenace
  / evanthemenace  

I'll catch you guys in the next video..