Front Brake Oil Change |Ytd/Obd scan| 20000+Run Fzs v3 abs fornt Brake fluid changing method||

Forn Brake Oil Change |Ytd/Obd scan| 20000+Run Fzs v3 abs fornt Brake fluid changing method




Changing the front brake fluid on a Yamaha FZ-S V3 ABS (after 20,000+ km run) involves the following steps:

Tools & Materials Required:

DOT 4 brake fluid (recommended by Yamaha)

8mm or 10mm wrench (for bleed valve)

Transparent rubber tube (for bleeding)

A container to collect old fluid

A clean cloth or tissue

A syringe (optional for precise fluid filling)



---

Step-by-Step Guide:

1. Preparation

Park the bike on a level surface and use the main stand (if available).

Turn the handlebars straight to keep the brake fluid reservoir level.

Cover surrounding areas (fuel tank, fairings) with a cloth to prevent damage from spilled brake fluid.



---

2. Open the Brake Fluid Reservoir

Locate the front brake master cylinder on the right handlebar.

Remove the two screws on the reservoir cap carefully.

Open the cap and remove the rubber diaphragm.



---

3. Bleeding Old Brake Fluid

Locate the bleed valve on the front brake caliper.

Attach a transparent rubber tube to the bleed valve, and place the other end into a container.

Hold the front brake lever and keep it pressed.

Use an 8mm or 10mm wrench to slightly loosen the bleed valve to release old fluid.

Tighten the valve before releasing the brake lever.

Repeat until clean brake fluid starts coming out.



---

4. Refill New Brake Fluid

Pour fresh DOT 4 brake fluid into the reservoir while bleeding to avoid air entering the system.

Repeat the bleeding process until no air bubbles are visible in the fluid coming out.



---

5. Final Checks

Once bleeding is complete, tighten the bleed valve securely.

Refill the reservoir to the MAX level (not overfilled).

Reinstall the rubber diaphragm and reservoir cap securely.

Clean any spilled fluid immediately.



---

6. Test the Brakes

Pump the brake lever a few times to restore pressure.

Check for leaks around the bleed valve and master cylinder.

Take a short ride at low speed to test brake performance.



---

OBD & YT Indicator Reset (If Required)

If your OBD or YT indicators were triggered during maintenance, you may need to use an OBD scanner or reset the warning manually (if applicable).


---

This method ensures smooth braking performance and extends the life of your braking system. If you’re unsure, consult a professional mechanic.

Let me know if you need more details!
Here are some hashtags you can use for your YouTube video on front brake fluid change for Yamaha FZ-S V3 ABS:

General Hashtags:

#YamahaFZS #FZSv3 #YamahaFZSv3 #FZSABS #BrakeFluidChange #MotorcycleMaintenance #BikeBrakes

Specific to the Topic:

#FZSBrakeFluidChange #FrontBrakeFluidChange #YamahaBikeMaintenance #BrakeBleeding #BikeBrakeService

Related to Tools & Method:

#DIYBikeMaintenance #MotorcycleBrakes #OBDScan #BikeService #TwoWheelerMaintenance

Using these hashtags will help your video reach a wider audience interested in motorcycle maintenance and brake fluid change tutorials. Let me know if you need more!