Desview T3 Teleprompter Support Improvement

In this video I will show you how I improved the support for the Desview T3 Teleprompter. I rigged it using 15mm rods so that the teleprompter itself will no longer be attached at the end of the camera lens. In this setup, the weight of the teleprompter and the device to be used will no longer be carried by the lens. I configured it as well so that it will be easier to change lens or camera because the height and distance of the teleprompter can be easily adjusted by sliding the rod clamps.

Decide for yourself if you want to improve the support this way. If you haven't bought this teleprompter yet and you know for sure you will be needing a much stronger support, maybe you would want to consider other teleprompters with already better support (but of course might be in the higher price range).

Below are some of the parts that I used to build this setup. Some links are affiliate:
SmallRig Base Plate: https://amzn.to/3B6t7J4
SmallRig Rod Clamp: https://amzn.to/3rBllnp
SmallRig Switching Plate: https://amzn.to/3GDjZNt
Niceyrig Rod Endcaps: https://amzn.to/3B6gJZM
Manfrotto Quick Release Plate: https://amzn.to/3HEqBMM

15mm Rods
SmallRig Brand
8 inch (for the Base Plate): https://amzn.to/3GEuK1T
6 inch (for the vertical and horizontal adjustment): https://amzn.to/3LdEZO6

NiceyRig Brand:
8 inch (for the Base Plate): https://amzn.to/3HDzarb
6 inch (for the vertical and horizontal adjustment): https://amzn.to/3rzklAk

Rod Riser Clamp:
Niceyrig 15mm Rod Riser Clamp: https://amzn.to/3B9VyGb
Kind of Similar Product From SmallRig: https://amzn.to/3374pMa

Feelworld Monitor: https://amzn.to/3B9SSZh