How to Replace Front Brakes 2004-2009 Mazda 3

Buy Now!
New Brake Pads from 1AAuto.com https://trq.video/ia-1ABPS02551

This video shows you how to install new front brake pads & rotors from TRQ on your 2004-2009 Mazda 3.

Estimated installation time for a professional technician is approximately: 1 hour 12 minutes

This repair was done on a 2006 Mazda 3 S 2.3L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2004 Mazda 3
2005 Mazda 3
2006 Mazda 3
2007 Mazda 3
2008 Mazda 3
2009 Mazda 3

Tools you will need:
• Flat Blade Screwdriver
• Pry Bar https://trq.video/oatp-1AXAA00020
• 17mm Socket
• 21mm Socket
• 9mm Socket
• Brake Caliper Compressor Tool. Single Piston. Screw Style.
• Brake Caliper Hanger https://trq.video/ort-1AXAA00439
• Ratchet
• Torque Wrench https://trq.video/obV5-1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Cloth Rags
• Copper Anti-Seize
• Gloves https://trq.video/ocst-1AXSS00048
• Rust Penetrant
• Safety Glasses
• Silicone Brake Parts Lubricant
• 7mm Hex Socket
• Drain Pan
• Floor Jack
• Hammer
• Jack Stands
• Wheel Chocks
• Wire Brush https://trq.video/oFV-1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.